The crushers in the DR line were developed for crushing coal and stone or other materials with a strength of up to 130 MPa.
They are located in the mine passage, in the route of the collecting scraper conveyor. The crusher can be used together with collecting scraper conveyors of various types and widths.
Mining vehicles consist of a welded body with two hinged bottoms, which are lifted together with the pair of wheels and axle. The vehicles are spring-loaded with the help of rubber springs. The vehicles are connected with the help of couplers. These mining vehicles are intended for train sets drawn by a locomotive and emptied by continuous passage through the discharge station, e.g. at the head of the storage vessel. The fronts of the vehicles are covered to protect against disintegrating rock at the time of filling.
The bender is of simple construction, undemanding in terms of service and maintenance. It consists of a frame, propulsion, a set of driving pulleys of the corresponding profile, supporting cylinders, a cover and a source of pressure for the adjusting and movable pulleys.
The conveyors are intended for the transportation of coal, stone and tailings in horizontal and pitched mining works. The material is transported on the upper branch of the endless belt from one or more filling places to one discharging place. We manufacture belt conveyor for belt widths of 800, 1000, 1200 and 1400 mm The individual parts of belt conveyors comply with the requirements set for the equipment of Class I, Category M2, for use in the underground parts of mines with a likelihood of danger from methane or combustible dust. The conveyors have a modular design. The individual parts of the conveyors are designed according to the needs of the customer according to the required performance, pitches of the route, automatics of the operation, length, number of filling places and stressing.
Primarily intended for dividing mining steel braces. It is necessary to choose a cutting mechanism with a knife of the right cross-section for each profile that is being cut.
If necessary, it is also possible to divide profiles other than mining reinforcement, for example, ordinary rolled profiles, round wood, etc., but special knives must be used for that.
The winches serve for the transportation of materials and also, for example, for stretching belt conveyors, or for the displacement of rail vehicles.
The extensive offer of winches is available on a separate page.
The suspended track is intended for the transportation of materials and workers in mining works with a minimum profile of 08 and a pitch of up to 30°. The extensive offer of suspended tracks is available on a separate page.