These are made for belt widths of 800, 1000, 1200, 1400 mm.
Driving stations are in the following variants:
The surface of the driving drums can be requested either steel or rubber-coated.
Conveyor installed power and length
Belt conveyor drive power is determined by the transported volume, conveyor length, belt speed and the conveyor track inclination. The electrical motor power can be 55 to 250 kW for one drive. One conveyor can be equipped by up to 4 drives.
Conveyors can be installed with a pitch.
It is a modular design. It is supplied in two types:
|Conveying speed at belt speed 1,6 m/sec and 80% performance||300 t/hr||480 t/hr||720 t/hr|
|DConveying speed at belt speed 2 m/sec and 80% performance||370 t/hr||600 t/hr||900 t/hr|
|Conveying speed at belt speed 2.5 m/sec and 80% % performance||470 t/hr||750 t/hr||1130 t/hr||1660 t/hr|
|DConveying speed at belt speed 3.15 m/sec and 80% performance||950 t/hr||1420 t/hr||2100 t/hr|
|Conveyor belt width||800 mm||1000 mm||1200 mm||1400 mm|
|Gearbox||Cone drive PKO 55 to 110 kW||Cone drive PKO 55 to 110 kW||Cone drive PKO 55 to 110 kW||SEW EURODRIVE 250 kW|
|Clutch||Flexible or hydraulic||Flexible or hydraulic||Flexible or hydraulic||Flexible|
|Driving drum diameter||Ø 630 mm||Ø 630 mm||Ø 630 mm||Ø 830 mm|
|Return station drum diameter||Ø 500 mm||Ø 500 mm||Ø 500 mm||Ø 630 mm|
|Belt tensioning||Electrical or pneumatic||Electrical or pneumatic||Electrical or pneumatic||Electrical or pneumatic|
|Automation||MJM 20M, APD||MJM 20M, APD||MJM 20M, APD||MJM 20M, APD|