The DCS-40 crushing unit is designed for crushing non-sticky, medium-hard or hard construction debris, construction waste, concrete or less abrasive natural materials such as limestone, sandstone or similar materials with a compressive strength of up to 200 MPa.
Material to be crushed is transported by a loader to the feeding hopper. The hopper is equipped with a feeder with vibrators.
The crusher is single-bracing with jaws with abrasion-resistant lining, with mechanical slot adjustment.
The conveyor belt width is 650 mm.
| Technical parameters | |
|---|---|
| Crusher performance | 40 tons per hour |
| Maximum crushed stone strength | 200 Mpa |
| Input hole | 700 mm x 500 mm |
| Output hole | 50 – 100 mm |
| Max. input material fragment size | 500 mm x 400 mm |
| Flywheel speed | 290 rpm |
| Crushing unit weight | 12 400 kg |
| Total installed power | 44 kW |
| Crusher dimensions length x width x height | 8,3 m x 1,8 m x 2,7 m |
| Weight: crusher with frame and electrical cabinet | 9 000 kg |
| Weight: frame with hopper and feeder | 2 300 kg |
| Weight: belt conveyor | 1 100 kg |
| Hopper edge height | 2,7 m |
| Hopper dimensions and volume | 1,1 × 2,5 m / 2 m³ |
| Crusher motor power | 37 kW |
| Conveyor width | 650mm |
| Belt speed | 1 m/s |
Information sheet:
- DCS-40 Crushing
Unit (PDF)
The DCS-40 P3 crushing unit has a container design where the crusher frame is located on the container bearing frame. The container design in addition to an easier way of transportation with the help of vehicles modified for the transportation of containers of the CTS line, also offers the possibility of moving on a paved surface using construction machinery on built-in rollers.
The crushing unit is designed for crushing non-sticky, medium hard or hard construction debris, construction waste, concrete and less abrasive natural materials such as limestone, sandstone and similar materials with a pressure strength of up to 200 MPa.
Material to be crushed is transported by a loader to the feeding hopper. The hopper is equipped with a feeder with vibrators.
The crushing unit is a single-strut crusher with abrasion-resistant lined jaws, equipped with hydraulic positioning of the output opening of the crusher.
The conveyor belt width is 650 mm.
| Technical parameters | |
|---|---|
| Crusher capacity | 10–40 tons per hour |
| Maximum strength of crushed stone | 200 MPa |
| Inlet aperture | 700 mm x 500 mm |
| Outlet aperture | 20 – 110 mm |
| Maximum size of input material piece | 500 mm x 400 mm |
| Flywheel speed | 290 rpm |
| Total weight | 12.300 kg |
| Total power consumption | 44 kW |
| Crusher dimensions (length x width x height) | 8,7 m x 2,35 m x 3,8 m |
| Hopper dimensions and volume | 1,1 m x 2,5 m / 2 m³ |
| Hopper edge height from ground with tilted sidewalls and removed | 2,65 m |
| Crusher motor power | 37 kW |
| Conveyor width | 650 mm |
| Belt speed | 1 m/s |
Information sheet:
- Crushing unit
DCS-40 P3 (PDF)
The DCS-40 P4 crushing unit has a container design with retractable conveyor, where the crusher frame is located on the container bearing frame. The container design in addition to an easier way of transportation with the help of vehicles modified for the transportation of containers of the CTS line, also offers the possibility of moving on a paved surface using construction machinery on built-in rollers.
The crushing unit is designed for crushing non-sticky, medium hard or hard construction debris, construction waste, concrete and less abrasive natural materials such as limestone, sandstone and similar materials with a pressure strength of up to 200 MPa.
Material to be crushed is transported by a loader to the feeding hopper. The hopper is equipped with a feeder with vibrators.
The crushing unit is a single-strut crusher with abrasion-resistant lined jaws, equipped with hydraulic positioning of the output opening of the crusher.
The retractable belt conveyor has a belt width of 650 mm.
| Technical parameters | |
|---|---|
| Crusher capacity | 10–40 tons per hour |
| Maximum strength of crushed stone | 200 MPa |
| Inlet aperture | 700 mm x 500 mm |
| Outlet aperture | 20 – 110 mm |
| Maximum size of input material piece | 500 mm x 400 mm |
| Flywheel speed | 290 rpm |
| Total weight | 12 600 Kg |
| Total power consumption | 44 kW |
| Crusher dimensions (length x width x height) | 8,7 m x 2,4 m x 3,8 m |
| Dimensions of crusher with conveyor retracted and platform removed (length x width x height) | 6,7 m x 2,4 m x 2,65 m |
| Hopper dimensions and volume | 1,1m x 2,5m / 2 m³ |
| Hopper edge height from ground with tilted sidewalls and removed | 2,65 m |
| Metal separator | Possibility of installation – accessories |
| Belt scale | Possibility of installation – accessories |
| Crusher motor power | 37 kW |
| Conveyor width | 650 mm |
| Belt speed | 1 m/s |
Information sheet:
- Crushing unit
DCS-40 P4 (PDF)
The DCS-40 diesel P5 crushing unit has a container design with retractable conveyor, where the crusher frame is located on the container bearing frame. The container design in addition to an easier way of transportation with the help of vehicles modified for the transportation of containers of the CTS line, also offers the possibility of moving on a paved surface using construction machinery on built-in rollers.
The crusher is equipped with an IVECO diesel generator – or it can be fitted with another type at the customer's request.
The crushing unit is designed for crushing non-sticky, medium hard or hard construction debris, construction waste, concrete and less abrasive natural materials such as limestone, sandstone and similar materials with a pressure strength of up to 200 MPa.
Material to be crushed is transported by a loader to the feeding hopper. The hopper is equipped with a feeder with vibrators.
The crushing unit is a single-strut crusher with abrasion-resistant lined jaws, equipped with hydraulic positioning of the output opening of the crusher.
The retractable belt conveyor has a belt width of 650 mm.
| Technical parameters | |
|---|---|
| Crusher capacity | 10–40 tons per hour |
| Maximum strength of crushed stone | 200 MPa |
| Inlet aperture | 700 mm x 500 mm |
| Outlet aperture | 20 – 110 mm |
| Maximum size of input material piece | 500 mm x 400 mm |
| Flywheel speed | 290 rpm |
| Total weight | 15 000 Kg |
| Total power consumption | 44 kW |
| Crusher dimensions (length x width x height) | 9,2 m x 2,54 m x 3,82 m |
| Dimensions of crusher with conveyor retracted and platform removed (length x width x height) | 7,6 m x 2,54 m x 2,65 m |
| Hopper dimensions and volume | 1,1m x 2,5m / 2 m³ |
| Hopper edge height from ground with tilted sidewalls and removed | 2,65 m |
| Diesel generator type | FOGO IVECO FDG 80 IS- Standart |
| Metal separator | Possibility of installation – accessories |
| Belt scale | Possibility of installation – accessories |
| Crusher motor power | 37 kW |
| Conveyor width | 650 mm |
| Belt speed | 1 m/s |
Information sheet:
- Crushing
unit DCS-40 diesel P5 (PDF)